S355J0H ERW Steel Pipe Scaffolding
S355J0H ERW Steel Pipe Scaffolding - High Strength, Low-Temperature Toughness, Full-Scenario Support
Modern construction demands scaffolding systems that go beyond simple access platforms - they are critical structural elements.S355J0H ERW steel pipe, manufactured to EN 10219, is specifically designed for demanding scaffolding and shoring applications, providing superior load capacity and environmental performance compared to ordinary structural steel.
Standard & Material Specifications
Parameter | Value / Requirement |
|---|---|
Grade | S355J0H (EN 10219-1) |
Min. Yield Strength | ≥355 MPa |
Tensile Strength | 470-630 MPa |
Elongation | ≥ 20% |
Impact Energy (0°C) | ≥27 J (longitudinal) |
Chemical Composition | Low carbon equivalent, good weldability |
Delivery Condition | Cold formed + ERW + NDT |
"J0" indicates 0°C impact toughness, suitable for cold climates or winter construction. "H" stands for hollow section.
Advantages of ERW Process
High dimensional accuracy- Strict control of OD, wall thickness, ovality; compatible with Ringlock, Cuplok, and frame scaffolding fittings.
Reliable weld quality- High-frequency induction welding + online eddy current/ultrasonic testing.
Smooth surface- No spiral weld (unlike LSAW/SSAW), easy for galvanizing and assembly.
Full traceability- Each pipe can be marked with grade, heat number, and batch number.
Surface Finish & Corrosion Protection
Finish | Characteristics | Suitable Environment |
|---|---|---|
Bare (rust preventive oil) | Low cost, short-term use | Indoor, temporary projects |
Hot-dip galvanizing (HDG) | Corrosion resistance ≥20 years | Outdoor, humid, coastal |
Electro-galvanized / Painted | Good appearance, medium protection | General outdoor, display structures |
Epoxy coating | Chemical resistance, strong adhesion | Chemical plants, wastewater treatment |
Performance Comparison: S355J0H vs Common Scaffolding Pipes
Property | S355J0H | Ordinary Q235B | Ordinary Q355B |
|---|---|---|---|
Yield Strength (MPa) | ≥ 355 | ≥ 235 | ≥ 355 |
0°C Impact (J) | ≥ 27 | Not guaranteed | Not guaranteed |
Suitable for low temperature | ✅Yes | ❌Poor | ❌Poor |
Weldability | Good | Good | Fair |
International acceptance | High (EN) | Low | Medium |
Quality Control System
Raw material certificate (EN 10204 3.1)
Online eddy current / ultrasonic testing
Hydrostatic test (optional, per EN 10219)
100% dimensional & visual inspection
Third-party inspection available (SGS / BV / TÜV)
